CareerGPS

< Back to List

Welders, Cutters, and Welder Fitters
Summary Occupational Forecast Data for Welders, Cutters, Solderers, and Brazers
Employment Employment Change Average Annual Job Openings Wage & Training Levels
2020 2025 Numerical Percent New Jobs Replacement Jobs Total Median Hourly Median Annual Training Levels
2,244 2,500 256 11.40% 51 254 305 $23.45 $48,776 High school diploma or equivalent
Description: Use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Forecast Data Source: EMSI (4th Quarter 2022)

Occupation Details

The information in this section represents occupational characteristics included in O*NET which defines key features of an occupation as a standardized, measurable set of variables called "descriptors". These distinguishing characteristics of an occupation are described in greater detail in the O*NET Content Model. All items are listed in descending order of importance.

  • Operate safety equipment and use safe work habits.
  • Weld components in flat, vertical, or overhead positions.
  • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
  • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
  • Detect faulty operation of equipment or defective materials and notify supervisors.
  • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
  • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
  • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
  • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
  • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
  • Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
  • Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
  • Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
  • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
  • Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
  • Mark or tag material with proper job number, piece marks, and other identifying marks as required.
  • Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
  • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
  • Remove rough spots from workpieces, using portable grinders, hand files, or scrapers.
  • Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
  • Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
  • Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
  • Fill holes, and increase the size of metal parts.
  • Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.

Knowledge

65%
Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
50%
Design - Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

Skills

53%
Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
50%
Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
50%
Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.

Abilities

75%
Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
66%
Near Vision - The ability to see details at close range (within a few feet of the observer).
62%
Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
62%
Control Precision - The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
56%
Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
56%
Oral Expression - The ability to communicate information and ideas in speaking so others will understand.
56%
Finger Dexterity - The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
56%
Multilimb Coordination - The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
53%
Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
50%
Visualization - The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
50%
Selective Attention - The ability to concentrate on a task over a period of time without being distracted.

Work Activities

87%
Handling and Moving Objects - Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
76%
Controlling Machines and Processes - Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
76%
Getting Information - Observing, receiving, and otherwise obtaining information from all relevant sources.
73%
Performing General Physical Activities - Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
64%
Inspecting Equipment, Structures, or Material - Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
64%
Communicating with Supervisors, Peers, or Subordinates - Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
58%
Monitor Processes, Materials, or Surroundings - Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
58%
Identifying Objects, Actions, and Events - Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
52%
Evaluating Information to Determine Compliance with Standards - Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
52%
Making Decisions and Solving Problems - Analyzing information and evaluating results to choose the best solution and solve problems.
50%
Organizing, Planning, and Prioritizing Work - Developing specific goals and plans to prioritize, organize, and accomplish your work.
50%
Establishing and Maintaining Interpersonal Relationships - Developing constructive and cooperative working relationships with others, and maintaining them over time.
Title Job Zone Two: Some Preparation Needed
Overall Experience Some previous work-related skill, knowledge, or experience is usually needed. For example, a teller would benefit from experience working directly with the public.
Job Training Employees in these occupations need anywhere from a few months to one year of working with experienced employees. A recognized apprenticeship program may be associated with these occupations.
Job Zone Examples These occupations often involve using your knowledge and skills to help others. Examples include sheet metal workers, forest fire fighters, customer service representatives, physical therapist aides, salespersons (retail), and tellers.
Education These occupations usually require a high school diploma.

Interests

Realistic - Realistic occupations frequently involve work activities that include practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many of the occupations require working outsi
Conventional - Conventional occupations frequently involve following set procedures and routines. These occupations can include working with data and details more than with ideas. Usually there is a clear line of authority to follow.

Work Styles

Attention to Detail - Job requires being careful about detail and thorough in completing work tasks.
Dependability - Job requires being reliable, responsible, and dependable, and fulfilling obligations.
Self Control - Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.

Work Values

-